Категории

Honda Accord AC Evaporator And Expansion Valve Replacement (2003 - 2007)

Опубликовано: 28 окт. 2015 г. 426 975 просмотров

Yes, this tiny little expansion valve requires you to tear into the dashboard to replace it. Blower motor and evaporator both have to come out before you can remove the valve.

*Don't forget to recover the AC refrigerant before disconnecting any AC components and/or lines.*

Applies to Honda Accord 2003 - 2007

Comments
  • hackfreehvac
    hackfreehvac 2 года назад (изменено) Who the hell designs an A/C system where you have to remove the evaporator coil to replace a TXV??? Most sane engineers have it on the engine side of the firewall where it takes 15 minutes to replace. Nice video BTW. I just shared it with some fanboy who claims that these are just as easy as swapping one in a Dodge etc where they are under the hood. LOL
  • Jason Voorhees
    Jason Voorhees 9 месяцев назад you can get to the expansion valve from under the hood just remove the lines at the firewall, but to remove entire coil yes you need to do it this way.
  • eduardo y lorenza avila
    eduardo y lorenza avila 3 месяца назад Cuando un aire de un kía k5 nó enfria que puede ser
  • Alex A
    Alex A 1 месяц назад @eduardo y lorenza avila muchas cosa
  • diulaylomochohai
    diulaylomochohai 2 года назад subscribed! amazing diy, u torqued the valve fasteners, yellow jacket gauges and you used suva virgin r134a
  • mas flo
    mas flo 2 года назад hey bud,why did you have to replace the expansion valve,,,?wat was the air conditioning doing??
  • happywrenching
    happywrenching 3 года назад (изменено) I forgot to say in the video that you must first recover the ac refrigerant that is in your car before disconnecting any of the lines / components. The car in the video had its refrigerant already recovered before the video was shot.
  • daviderhahon
    daviderhahon 4 месяца назад Now, that is the part of the video I was waiting to see but never saw.
  • Dennes M Marrero Colon
    Dennes M Marrero Colon 4 дня назад I can do it the same with toyota venza 2011?
  • Scott S
    Scott S 2 года назад where can you get service manuals with this many details?
  • happywrenching
    happywrenching 2 года назад I wanted to mention that I had to redo this job because the aftermarket valve that we got from RockAuto did not work properly. It caused high pressure readings and the A/C had poor cooling performance. Installed an OEM Honda valve and the A/C is working great again. On the bright side - the job only took about 30 minutes this time around :)
  • Chris Wilson
    Chris Wilson 2 года назад What is the OEM Honda valve part #?
  • Chris Wilson
    Chris Wilson 2 года назад NVM. found it 80221-SDA-A01
  • Jonathan Caron
    Jonathan Caron Год назад happywrenching my mechanic is working on this except for her broke the screws somehow and I can’t find the part number on them. Where can I find them?
  • NeilC Cross
    NeilC Cross 11 месяцев назад If you going to go through all the labor why not replace the evaporator. if it has any age at all the aluminum is bound to be degraded.
  • TeraVolt
    TeraVolt 11 месяцев назад (изменено) +NeilC Cross The evaporator is located inside a closed shell and in most modern cars a filter keeps it away from dust and contamination. It's not like a condenser, which is always open to road salt, dust and whatnot. Money for an evaporator, unless it leaks, of course, is better spent on a new condenser in my own opinion. I have a 15 years old car, with a 15 years old Harrison CVC compressor and ice cold air (as much as the blue type 42 PSI destroke valve allows), and while the condenser clearly shows its years with some bent fins and an opaque oxidated look, the evaporator looks shiny and clean and it seems new.
  • luis amoa
    luis amoa 9 месяцев назад Do you know what rockauto brand you bought?
  • Bubba Buford
    Bubba Buford 7 месяцев назад I have extremely high pressure on low side and ac is blowing hot air. compressor is running and after a while the air condition starts cooling could this be my problem?
  • Korea MostWanted
    Korea MostWanted 2 года назад Thank you for sharing your video.best instructions I've seen so far....how long does it usually takes start to finish?
  • happywrenching
    happywrenching 2 года назад Not counting the time to recover and refill the refrigerant, around 2 hours.
  • Daniel StPierre
    Daniel StPierre 9 месяцев назад You forgot to mention that if you open the system you need to change the filter drier